vrijdag 18 december 2015

3D scanning and priorities, by Kotryna Valečkaitė

As the project slowly went into motion we had the first digitizing session in the laboratory of Geosciences&Engineering. Our group was provided with the luxury to first hand observe both micro- and macro-CT scanners in working. Both with their advantages and limitations, they gave us a new perspective of how to order and process given archaeological objects.
When Maaike came in with boxes full of ceramics from the Archaeological archive of Amsterdam, we understood that it was neither efficient, nor possible to scan them all. At this point selection was crucial. At first sight we had three main groups of objects: lice combs (highest level of detail), broken colored ceramics bound with metal strings (necessity to make more detailed scans to understand the technique) and sets of white ceramic tableware lacking multiple shards.
DSC_0381DSC_0307Detail hermione
The latter seemed to be the closest to the issues visible in the goal of the project. Yet the other two gave us interesting side paths which would improve overall understanding of the methods and possibilities of 3D scanning. Based on this, we made a queue sorted by importance, which would lead to at least one object of a group scanned.
After the first inspection of the digitized forms we were rather amazed that the precision of 0,3mm was not sufficient for some of the fine-detailed specimens. E.g. the combs lost their teeth, metal bindings were muffled, crack lines barely visible. Consequently we were offered to work with much finer machinery (micro-CT scanner) mostly used for small scale material research. Yet the time and money needed for this method led to only two specimens scanned: the finest ivory comb and a detail of a metal connection. In total we got 13 scans, excluding identical scans in higher precision. The notes and conclusions after this are as follow:
1. There are 2 CT-scanners in the Geoscience&Engineering laboratory:
  • Macro-scanner can be used to scan rather big objects, but the fine details are almost completely neglected; object is stationary, thus there is a small chance of damage. Precision 0,3mm.
  • Micro-scanner is very slow (1h per object) and has very limited object size: till 100-120mm in diameter; object is rotating, thus it needs to either be glued or fixed, which requires extra attention not to damage the object. Precision 0,03mm.
  • Both scan only the form and not color; they can detect cavities, but not slight changes in the material density
2. The digitized forms are saved as 2D images of section cuts in .dcm or .ima file format, which need multiple steps to be converted into editable 3D objects. Even though we were informed that it is a very quick procedure, to gain fine details it is necessary to have a powerful computer(16GB RAM) and correct software (which is usually paid).

Geen opmerkingen:

Een reactie plaatsen